Mustang HID Kit...Where to Mount Your Ballasts

While our HID kits are 100% plug and play, the hardest part about the installation is finding a good spot to mount your ballasts. We decided to post up some pictures and information on where we recommend the ballasts to be mounted on all of our HID headlight kits.

Driver Side
On the drivers side, when you remove the headlamp, you will see decent side hole in which you can pass all the HID wires through and tuck your ballast behind. Please see the picture below for reference.


As you can see, our ballast is tucked in between the headlamp post and battery. We recommend to first install your new HID bulb, then plug in the connections to the ballast, and finally , slide the ballast into place. Please note, there is more than enough space for two ballasts to be tucked in behind this hole. Those of you with HID Foglight kits, you can also tuck the ballast from that kit in behind the headlamp and run the wires down to your foglamp.

Passenger Side
Mounting the ballast on the passenger side is as simple as making all of your connections to the HID bulb and then simply using double sided tape to secure the ballast to the fenderwall as shown in the picture below.



Notice, we are running a JLT True Ram air on our 04 Mach 1. Even if you have the stock induction set up, you will still have plenty of space on the fenderwall to install the ballast. The wires will be long enough to reach the HID bulb.

With the examples outlined above, mounting your ballasts in this manner will help keep them away from water and any moving engine parts. The ballasts are for the most part water resistant and will not be harmed if exposed to small amounts of water.

You can view all of our HID light offerings by visiting the link: HERE

As always, have fun in your Stang and be safe!

Sincerely,

The StangMods Team
1.800.618.9350
sales@stangmods.com

How To: Making your foglights stay on when turning your high beams on in your 94-04 V8 Mustang.

On all 94-04 GT & Cobra Mustangs, when the high beams are activated, the foglights immediately turn off. This is a function implemented from the factory. With the introduction of our Bi-Xenon HID Headlight Kit and HID Foglight Kit for 94-04 Mustangs, we wanted our customers to be able to run the HID high beam while having their HID foglights stay on. Outlined below are the steps necessary to have your foglights stay on when your high beams are activated in any 94-04 Mustang.


Materials Needed:

16 gauge wire approximately 2.5” in length ($4.24 for a 12’ roll)

Two male spade connectors ($3.14 for a pack of 4)

Electrical Tape ($2.09 for a roll)

Wire Strippers

Needle Nose Pliers

Preparing Jumper (fake relay):

Take your 16 gauge wire and strip off approximately ½” of the plastic sheathing on both ends.

Crimp the two male spade connectors at each end of your 16 gauge wire with your pliers. Wrap any exposed wire with black electrical tape.

This completes the fabrication of your jumper.

Step 1:

Open the cover on the fuse box located underneath the hood and remove the relay using needle nose pliers.


Step 2:

Once the relay is removed, you will notice five different open slots. The male connectors at each end of your jumper must be inserted in the two outermost slots.

Step 3:

Insert your jumper (fake relay) in the two outermost slots.

Step 4:

Finally, finish your installation by closing the cover on the fuse box. You are now done!

You should now be able to turn your high beams without having the foglights cut off.

For further questions on the installation process or questions on any of our HID Lighting products, please feel free to contact us:
Phone: 1.800.618.9350Email: sales@stangmods.comAs always, have fun in your Stang and be safe!

Mach 1 Grille Delete...The differences between the two.

After numerous emails and calls from customers wondering what the differences were between the two and three piece grille delete, we decided to create a little review on the two grille deletes. Enjoy!

StangMods.com offers a two-piece and three-piece Mach 1 Grille Delete for your 99-04 GT or V6. There is only one slight difference between the two kits. Both kits use OEM Ford parts for excellent fitment and looks. Read on below for more information on the Mach 1 Grille Deletes we offer.

Two Piece Grille Delete:
This kit includes the running pony emblem and the lower plastic "U" shaped section. The two piece kit is shown directly below.



Three Piece Grille Delete:
This kit includes the running pony emblem, lower plastic "U" shaped section, and the upper-center grille section. The three piece kit is shown directly below.



Differences:
As you can see from the pictures above, the only difference between the grille deletes is that the three piece kit includes the upper-center grille section.

Differences In Installation:
There are absolutely no differences in installation between the two kits. Installation is very simple, the hardest part being removing your stock grille.

Differences in Looks:
It is hard to distinguish between the two piece and three piece grille delete when the hood of your Mustang is closed. The upper center grille section in the three piece kit is primarily visible only when the hood is opened. It more or less gives the grille area a cleaner appearance when the hood is popped.

Whick Kit to Purchase:
We recommend going for the two piece kit if you are on a budget. The three piece kit is approximately $40 more. If you show your car and want to maintain a cleaner look, we suggest spending the extra money and going for the three piece kit. Otherwise, the two piece kit gets the job done very well while saving you $40.

As always, enjoy your Stang and be safe out there!

Sincerely,
The StangMods Team
1.800.618.9350
www.StangMods.com

Mustang Tail Light Tint Installation Instructions

We decided to put together a little how to on the installation of our vinyl tail light tints. While the process is very simple, the instructions below should help anyone with addtional questions about the install process. Here it goes...


Materials Needed
Spray bottle with warm water and three drops of liquid soap.
Squeege for installation (included with tints)
Paper Towels

Step One:
Thoroughly clean the surface of the lens in which you are applying the tint to.

Step Two:
Peel off backing from tint as shown below. (avoid from touching any foreign surfaces)


Step Three:
Generously spray soapy solution onto the adhesive side of the tint film and the lens you are working on.


Step Four:
Align tint and apply by using squeege to smooth the film over the lens you are working on. Start at the center of the lens and move outwards with the squeege.


Step Five:
Repeat the above mentioned steps for the remainder of the lenses you are applying the tint film to. If the tint becomes misaligned, you may peel it up and re-apply it.

Things To Remember:
Small air bubbles, minor scratches, and/or haziness will disappear after tint settles and warms up.
You can maintain the appearance of the tint after installation by waxing every so often.
Tints are for show and off-road use only. Check local laws before installation.
The installation process is the same for all vinyl tint products we offer. If you have further questions about the tint installation process, please feel free to contact us:sales@stangmods.com

As always, have fun in your Stang and be safe!

Free Shipping at StangMods.com!

Hello everyone, I just wanted to announce that StangMods.com now provides 100% totally free shipping on every single part and every single order. There are ZERO handling or miscellaneous charges that will get added onto your order! The price you see for the part is the price you will pay! Nothing more, guaranteed! In addition to our already low prices, the free shipping is now is an even better reason to purchase all of your parts from StangMods.com!

Mustang Fog Light HID Kit from StangMods!

StangMods is proud to introduce our HID Fog Light Kits for 87-08 Mustangs!

Each Mustang HID Foglight kit is direct plug and play which require no permanent modifications to your Mustang. Installation is a snap with our step by step instructions. All hardware is included in the kit. Ballasts have a one year warranty!
The HID fogs are almost necessary for anyone who already has our HID headlight kit or for anyone looking to purchase the HID headlights now!


Go HERE to purchase your HID Fog Light Kit today!

As always,

Have fun in your Stang and be safe!

The StangMods Team

StangMods Mustang Tail Light Tint Overlays

We have great news to announce about our vinyl tint overlays for all 99-06 Mustangs!

1. First off, we've drastically reduced the price on all of our tint overlay products.
2. Secondly, we have also added "black out" tint to our product line!

Our tint prices are as follows:

• Tail light tint for all 99-08 Mustangs....$59.95 shipped!
• Headlight tint for all 99-08 Mustangs...$59.95 shipped!
• Side Marker Tint....$24.95 shipped!
• Third Brake Light Tint...$24.95 shipped!
• Fog light tint...$24.95 shipped!
• Front turn signal tint for 05-08..$24 shipped!

Each product comes with full installation instructions and a squeege for installation!

THE COMPETITION SELLS THE SAME TINT FOR $15-$20 MORE!

In addition, all of our tint are in stock and shipped same day via USPS 2-3 Day Mail!

GO HERE to purchase your tint.


StangMods has also added "Black Out" tint to the product line. Now you can get any of our tint products in the darker "black out" style.

The first picture below is our black out tint installed

The picture below is our smoked tail light tint installed!

If you still have questions, feel free to contact us via
Phone: 1.800.618.9350
or
Email: sales@stangmods.com

Mustang 4300 HID Kit from StangMods.com

You've asked for it, we've got it! StangMods is happy to introduce the latest addition to our HID lighting selection.

StangMods 4300 HID KIT!

This kit provides a pure white beam with zero traces of blue light. Many have asked for the 4300K kit for its superior brightness and amazingly good looks. We have these kits in stock and ready for same day shipment.

Here are some pictures of our Mach 1 with the 4300K HID Kit installed:







If you are still unsure of which HID kit to go with, Click Here for a brief overview of the differences in each kit.

All of our HID kits include: (2) new ballasts, (2) new HID bulbs, (1) new wiring harness with inline fuse and relay, (1) step by step installation instructions written by our staff, and finally, we include the necessary zip ties for installation. This is a complete upgrade that is affordable, safe, easy to install, and most importantly, looks good! Purchase your HID kit from StangMods.com today!

Click Here to purchase your HID Kit

As always, have fun in your Stang and be safe!

Mustang Vinyl Tail Light Tint from StangMods

Good news! We just received a huge shipment of our vinyl tail light, headlight, side marker, and third brake light tint for 99-04 and 05-06 Mustangs!

Check out the pictures of them after installation on a customers 04 Mach 1





Here is a picture from a customer's car.





We carry headlight, tail light, side marker, and third brake light tint for all 99-04 Mustangs. In addition, we carry the tail light and third brake light tint for all 05-08 Mustangs! Check out our viny tint and the rest of our products at: http://www.stangmods.com/

Mustang Parts Mustang Parts & More Mustang Parts!

At StangMods.com we carry a huge selection of the Mustang parts you want at very competitive prices! Check out our specials below...

Eibach Lowering Springs from $239.
They can be found HERE

Short throw shifters from Steeda, MGW, & Pro 5.0! All of our shifters come with free shifter gasket sets!

You can browse our shifters HERE

Tokico D-Spec Shocks and Struts $599 shipped! You wont find a lower price anywhere else!

Check them out HERE

HID Lighting for your Stang! StangMods is home to the HID lighting kit.

Choose between our 6K, 8K, & 10K HID kit. HERE












Overall, StangMods.com is your place for Mustang performance, Mustang appearance, and Mustang suspension parts. We are frequently adding new parts to our inventory. Check out our NEW PRODUCTS PAGE for more information.

Also, feel free to join our mailing list so that you may receive notification of specially priced parts and discount coupon codes to use on our site.

StangMods.com now has a blog!

Welcome to our blog! Here we will post up many different things about our company and other related articles. From installation and tech artilces, to new parts added to the site, be sure to check back frequently for updates!

www.StangMods.com

How to contact us:

Email: sales@stangmods.com
Phone: 1.800.618.9350